Disinfection Services
ADC Environmental Solutions is a full-service disinfection and decontamination company that focuses on removing, reducing or eradicating the contamination from within your indoor environment.
- Airborne Contamination and Spore Removal- Air scrubbing and HEPA (High-Efficiency Particulate Air) filtration, which traps and removes spores from the airspace of your indoor environment.*
- Surface Contamination and Spore Removal- HEPA vacuuming of all porous and non-porous surfaces, as well as Hot Water Extraction of soft goods; upholstered furniture, mattresses and box springs, carpeting, etc.*
- Source Removal Cleaning and Disinfection of Non-porous Surfaces- Physical removal of the bioload and residues from hard, non-porous surfaces such as walls, horizontal surfaces, flooring and/or contents, followed by disinfection with SteraMist™.*
- SteraMist™ BIT™ disinfection- This state of the art disinfection system produces a Reactive Oxygen Species (ROS) known as Hydroxyl Radicals. These ROS damages and disrupts the cell wall of pathogenic organisms through oxidation, eradicating the pathogens, bacteria, viruses and mold within your indoor environment.
*All services are tailored to fit your specific needs and budget; services are varied and may be incorporated into a comprehensive cleaning, decontamination, and disinfection protocol or can serve as individual stand-alone services.
Utilizing the SteraMist™ Binary Ionization Technology® (BIT™) surface unit or environmental unit, ADC Environmental Solutions offers services to disinfect the indoor environment. ADC may be able to reduce and/or eliminate* pathogenic and non-pathogenic organisms on all hard, non-porous surfaces in your indoor environment. SteraMist™ BIT™ is a hospital grade disinfectant* that can achieve a six-log, 99.9999% reduction on all challenged pathogens, including the Geobacillus Stearothermophilus spore.
The SteraMist™ Surface Unit is fast-acting, hand-held, point and spray disinfection system. It is the safest and easiest process to make certain that your facilities and assets are disinfected to the maximum extent possible. This single applicator surface unit enables disinfection of all surfaces* – including high touch, sensitive medical equipment, and electronics. The room is safe to enter within minutes after the Activated Ionized Hydrogen Peroxide (AIHP) mist has been applied.
The SteraMist™ Environment System is remotely controlled, and provides complete room disinfection/decontamination* using multiple treatment applicators per unit. Effective whole complete room treatment in just over 75 minutes for a room (3,663.7 ft3/104 m3) including application time, contact time, and aeration time. Less time is typically needed for smaller size rooms.
In addition to the environmental disinfection services, ADC Environmental Solutions also offers a full-service cleaning, for a better level of clean.
ADC can offer services for many different indoor environments, including:
Healthcare
Hospitals and healthcare facilities across the world are continuously searching for better ways to limit the spread of infections. Patients can come into contact with a variety of infectious diseases that are easily spread from contaminated high-touch surfaces. Several hospitals and medical facilities around the world have incorporated SteraMist™ BIT™ within their disinfection protocols, we offer this state of the art disinfection system as part of our disinfection & decontamination services. ADC Environmental Solutions is a proud member of the TOMI Service Network, offering SteraMist™ BIT™ Disinfection Services & Equiment Sales.
Laboratories
Broad-spectrum surface disinfection that’s economical, non-corrosive, and easy to apply is essential to keeping laboratories productive and safe. The sciences community understands that surface contamination and sub-optimal general room hygiene adds to poor outcomes and potential danger to staff. The demands of today’s manual cleaning protocol in relation to time and thoroughness has demonstrated ineffective for complete room cleaning.
Pharmaceutical
ADC Environmental Solutions adheres to cleaning protocols for USP 797 compliance. As part of USP 797 disinfection protocol, we offer SteraMist™ BIT™. This unique, state-of-the-art EPA registered hospital-grade disinfection technology is effective for 6-log pathogenic reduction* on all hard, non-porous surfaces, bench top spaces and sensitive laboratory equipment and instrumentation.
Commercial
Great for frequent use, SteraMist™ BIT™ does not contaminate the environment with any toxic byproducts and will not damage any material making it ideal for disinfection & deodorization in educational facilities, municipalities, athletic clubs, senior living facilities, child care centers, multi-unit buildings, and more.
Residential
The time has come for a real environmental solution to improving the indoor environmental quality for those suffering from illnesses like; immune deficiencies, major illness, asthma, surgery, and nurseries for newborns. Our disinfection services can be used in one room or for an entire house. Improving the indoor environment, cleaning & disinfecting for health, that’s what we do!
*SteraMist™ Surface Unit: Staphylococcus aureus (Staphylococcus) (Staph) (ATCC# 6538), Pseudomonas aeruginosa (Pseudomonas) (ATCC# 15442), and Methicillin Resistant Staphylococcus aureus (MRSA) (ATCC# 33592)
┼SteraMist™ Environment System: Clostridium difficile spores (C. diff) (ATCC# 43598), Staphylococcus aureus (Staphylococcus) (Staph) (ATCC# 6538), and Pseudomonas aeruginosa (Pseudomonas) (ATCC# 15442)
